Huepar B03CG Pro - 3D Laser Level Lithium ion Battery with Hard Carry Case included freeshipping - Best Laser Level - Advanced Technology - Huepar
Huepar 3D Laser Level, Li-ion Battery & Hard Carry Case included B03 CG
Huepar 3D Laser Level, Li-ion Battery & Hard Carry Case included B03 CG
Huepar 3D Laser Level, Li-ion Battery & Hard Carry Case included B03 CG
Huepar 3D Laser Level, Li-ion Battery & Hard Carry Case included B03 CG
laser level for sale
Huepar 3D Laser Level, Li-ion Battery & Hard Carry Case included B03 CG
Huepar 3D Laser Level B03 CG details

Huepar B03CG Pro - 3D Laser Level Lithium ion Battery with Hard Carry Case included

$189.99
# SPECIAL OFFER: BUY B03CG GET LR5RG FREE
# NOTE: Add B03CG PRO to your cart and you will automatically get a free LR5RG
# ATTENTION: The BOGO campaign does not support 15% OFF with discount code NY2022
  • Fast Delivery & ETA:May 19 - May 23

  • 24 Months Official Warranty: Easy Returns & Exchanges

Huepar B03CG Pro - 3D Laser Level Lithium ion Battery with Hard Carry Case included freeshipping - Best Laser Level - Advanced Technology - Huepar

Huepar B03CG Pro - 3D Laser Level Lithium ion Battery with Hard Carry Case included

$189.99
SPECIFICATIONS
  • Fully Layout with 3 x 360° Line Lasers: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. The three laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.
  • Dual Power Methods & Type-C Charging Port: Huepar B03CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.
  • Brighter Green Laser & Outdoor Pulse Mode: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 200 feet with Huepar Line Laser Detector.
  • More Installation Methods: The laser level comes with 1/4"-20 thread to suit for standard tripod or laser mounting pole. Equipped with a magnetic pivoting base, the laser tool can be rotated to the required angle. And the 1/4"-20 & 5/8"-11 mounting threads help mount it to different tripod threads. Two strong magnets allow for attachment to metal track and steel. Two nail holes for more fixing methods when working. The laser windows can be removed and replaced with a screwdriver.
  • Durable Design & Package Contents: The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection. IP54 water/dust resistance ensures you work well in hazardous working conditions. The kit comes with a hard carry case bringing much more convenient to carry and store the laser tool. Package includes Laser level, Li-ion battery with type-c charging port, Magnetic bracket, Type-C power cord, Power adapter, Target plate, User manual.

1

Specifications for Huepar 3D Green Laser Level B03CG Pro:

  • Projection: 3 x 360° Green Laser Lines
  • Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
  • Laser Wavelength: 505-520nm
  • Horizontal / Vertical Accuracy: ±1/9 Inch at 33 Feet
  • Leveling / Compensation Range: ±4°
  • Leveling Time: 3s
  • Working Distance: 85 feet (300 LUX), 200 feet with Huepar Laser Detector LR-5RG / LR-6RG
  • Power Source: 3.7V / 5200mAh Li-ion Battery
  • Reference Operating Time: About 8 hours with all laser beams on
  • Mount Size: 1/4"-20
  • IP Rating: IP54 dust-proof, waterproof and shockproof, reliable and tough
  • Operation Temperature Range: Between -10℃ and +50℃
  • Storage Temperature Range: Between -20℃ and +70℃

WARNING: Do not point the laser beam directly into the eyes. The device is a laser class 2 laser product according to IEC / EN60825-1 / 2014. It is allowed to use the device without any further safety precautions. The eye protection is usually secured by aversion reactions and blink reflex.

Almost Unlimited Field of Application:

  • One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room.
  • You can use the intersection of the laser lines to project reference points and divide surfaces at right angles.
  • Short press operation button to switch the laser line combinations in turn.
  • The three laser lines can be selected individually depends on job site applications.

1

 

Self-leveling Mode:
When the laser tool is switched to the unlocked position, the self-leveling mode is enabled.
The laser beam will flash when the tool is beyond self-leveling range ± 4°.
Manual / Tilt Mode:
When the pendulum locked, the laser tool can be placed for alignment at any angle.
The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.

1

Power-saving Outdoor Pulse Mode:

  • Turn ON the pulse mode: After power ON, short press "P" button to switch ON/OFF the pulse mode.
  • Pulse mode extends the working range up to 200 feet in brighter working conditions when using with Huepar Line Laser Detector
  • When the pulse mode is activated, the laser beams are dimmer, the pressure on eyes is less when working at close range, and the working time can be appropriately extended
  • It is compatible with Huepar LR-6RG / LR-5RG Line Laser Receiver (need to purchase separately) only.
  • Keep the pulse mode on when using with a receiver.

1

Type-C Charging Port:

  • This laser tool utilizes the included large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time.
  • The lithium battery with the Type-C charging port can be charged separately.
  • Direct input charging: When taking out the battery, the laser tool can be used at the job site by plugged in.
  • Four battery indicators on keypad allow users to know the current battery volume.
  • Charging protection helps prevent from overcharging.

1

More Installation Methods: 

  • 1/4"-20 female thread on the laser level can help to mount it to the tripod or laser mounting pole.
  • 360° Strong Magnetic Pivoting Base: Allows being adsorbed onto metal track and steel. The base provides 360° free rotation to meet different angles required.
  • 1/4"-20 and 5/8"-11 mounting threads on the bottom of the bracket for temporary fastening in place or being fixed on tripod or laser mounting pole.
  • Replaceable Protective Cover: The laser windows can be removed and replaced with a screwdriver.
  • Green Target Plate: Increases the visibility of the laser beam.

1

Bright Green Laser Diode:

  • This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.
  • At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet.

1

Flat Top Cover Design: 

  • Designed with the flat top cover, this laser tool projects 360° laser lines for tiling or ceiling installation at 10mm from the wall and ceiling.
  • Huepar PV10 + Bracket is recommended for quick setup in wall and ceiling applications (ASIN: B07X2K3TVW, need to purchase separately)
  • The laser windows can be removed and replaced with a screwdriver.

1

Durable Design:

  • The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection.
  • The kit comes with a hard carry case bringing much more convenience to carry and store the laser tool.
  • IP54 water/dust resistance ensures you work well in hazardous working conditions.

Package Contents:

  • 1 x Huepar B03CG Pro Laser Level
  • 1 x Rechargeable Lithium Battery 3.7V / 5200mAh
  • 1 x Type-C Power Cord
  • 1 x Power Adapter
  • 1 x 360° Magnetic Pivoting Base
  • 1 x Green Laser Target Plate
  • 1 x Multilingual User Manual
  • 1 x Hard Carry Case
24-MONTH WARRANTY

We are confident of the quality of our products and offer 24 month Warranty( only for official website orders)

FREE SHIPPING

Huepar has established warehouses in the United States, Britain, Germany, Poland, Spain, and China to provide fast delivery services for every consumer.

The time frame of an order delivery is divided into two parts:

Processing time: 1-2 working days

Shipping time: 2-5 working days

GREAT SUPPORT

PREMIUM SERVICE, SUPERIOR QUALITY

24/7 Premium service team
Equipped with factory-trained experts, Huepar's consumer service team strives to find the right solution for your needs – from advice to sales and repair & maintenance services.
You can enjoy efficient support from Huepar- we promise to respond in 24hrs and solve the problem in 48hrs.


Lifetime Customer Support
All Huepar products come with lifetime customer support - no worries about exceeding the service period.
All product defects, such as accuracy malfunction, battery and charger damage and requests for replacement parts will be dealt with on time, every time.

REVIEWS

Customer Reviews

Based on 48 reviews
92%
(44)
6%
(3)
0%
(0)
2%
(1)
0%
(0)
V
V***v

Delivery to the Nizhny Novgorod region two weeks the goods correspond to the description packing Super came all the whole and working

O
O***k

супернабор. мужу понравился подарок

S
S***k

Good laser level. Error within deviation

S
Shopper

Excellent laser level

E
Ernest E.

love my new laser and love the price worth the money for sure