3D Laser Level Green Beam Cross Line Laser Self Leveling 147ft 45m large Power Huepar 903CG

Huepar

172 items left


 

 

Huepar has a team of professional engineers and designers. Constantly promote and provide products and services for high-end markets, pursuing technological innovation and quality commitment.

Specifications:

Laser Beam Color: Green

Type: 12 Lines
Laser Class: Class 2 (IEC/EN60825-1/2014), output power <1mW
Laser Wavelength: 510 nm
Leveling Accuracy: ±3mm/10m
Leveling/Compensation Range: 4°±1°
Working Distance (Line): 45m, up to 60m with laser reveiver
Operating Time: 4 hours with all laser beams on
Spread Coverage: H360°/ V360° / V360° (3*360°)
Power Source: Li-lon battery
IP Rating: IP54, waterproof, dustproof and shockproof, reliable and tough.
Operation Temperature Range: 14℉- 122℉(-10℃-+50℃)
Storage Temperature Range: -4℉- 158℉(-20℃-+70℃
Size: 8.9*6.5*9.1cm (3.5”x3.58”x2.56”)

 

Items in the Package:

  • 1 X Huepar  903CG laser level
  • 1 X Magnetic pivoting base
  • 1 X Green laser target card
  • 1 X Cloth case
  • 1 X English User's Manual 
  • 1 X Lithium battery
  • 1 X Battery charger

 

Features:

✿ The button introduction:

The laser level has three laser windows, each window can launch 4 laser lines, totally 12 laser lines(4 laser lines combine to a plane).  Attention: There are at least 4 laser lines, it can not keep 1 or 2 laser lines.

✿ Product Highlights:

The 903CG laser is a cross line laser level. This unit is self-leveling with accuracy range of within ± 4 °. The working range of this laser is up to 45m, depending on the work area’s illumination. 

✿ Design:

The 3D 903CG laser level is a compact, practical option for basic cross line leveling work. Measuring at 1/4 ", the laser can fit comfortably in the palm of your hand. It has a hard plastic housing to protect the laser beams and pendulum leveling system within. The housing has a ribbed rubber casing that protects it from scratches while giving extra friction to make it slip resistant.

✿ Mounting Option:

The 3D 903G laser level has 2 mounting nut with a 1/4 " thread and a 5/8" thread at the bottom of the unit. This allows you to mount it either to a bracket or a tripod for security. The unit can be placed on a regular surface, but securing it usually guarantees less movement for more accurate work. A magnetic base is included in the package. 

✿ Leveling Function:

Once the pendulum is in unlocked condition, the instrument will be self-leveling within 4 degrees, when the unit is using out of the leveling range, laser lines and main indicator will keep flashing.

✿ Pendulum Lock:

The 12 lines Green beam laser level is a precision instrument and should be treated with care. When not in use, the pendulum should always be in the Off position (OFF mode). Locking the pendulum allows the Cross Line Laser to better withstand vibration and Trauma incurred during transportation or if the units is dropped.

✿  The difference between the green laser and the red laser: endulum Lock:

They are from the same factory, the function is same.

The green laser's visibility is four times of the red laser, it's material costing is higher than red laser, it sales more expensive than red laser.

Japan Sharp Green Laser Technology

Adopt Sharp's laser unit, wihch is the best green laser unit in the word at present from Japan.
 
Green laser is 2 times brighter than red laser with the same light source. still accurate and clear under the sun, available for outdoor using.

Two modes of use, with lock design, reduce losses and lock the movement.

➤Self-leveling mode:

Unlock the pendulum, self-leveling mode is enabled. The laser beam will blink continuously at 2Hz when the tool is beyond self-leveling range (4°±1°).

➤Manual mode:

Lock the pendulum, you can (use tripod or other bracket )place the laser tool at various angles to project non-level straight laser lines. Slashes can be projected.The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.

Three kinds of circuit switching functions:

➤ Each time the power button is pressed once, the laser tool projects 360° horizontal lines, 360° vertical lines, and 360° vertical lines in sequence.

➤ 360° cover horizontal line and 360° vertical line and 360° vertical line (H360°/V360° /V360°)

Pulse Mode:

 Unlock the pendulum, press and hold the power button (for about 5 seconds) to turn on the pulse mode, then turn it on red.

 When outdoor work is required (the receiver needs to be purchased separately,  the laser receiver can receive pulses.

 The receiver frequency is 10khz and the Huepar brand is the best pairing.

Various kinds of fixing method:

➤ Strong Magnetic L mount with triop thread can attaches the laser to any steels easily, turning around 180-degree as you like.

➤ It can also accepts a standard tripod screw to do height adjustment.

 

 

 

 

 


Related Items


Social Proof