Huepar LS03CG - 3x360°Laser Level with 2 Li-ion Batteries 3D Outdoor Green Cross Line Self Leveling for Construction

• TWO LI-ION BATTERIES & TYPE-C CHARGING: This laser level comes with 2 5200mAh Li-ion batteries for convenient replacement and continuous use. When the battery is exhausted, you can directly plug in the charger and the laser level can be used normally. 4 battery indicators on the Li-ion battery allow users to know the current battery level and charging status. With Type-C charging port, the batteries can also be charged by phone, laptop, power bank, car charger, etc.level.

• OUTDOOR PULSE MODE: This laser level projects green laser beam which is 4 times brighter than standard red beams with a working range up to 30m/98Ft of an accuracy +/- 3mm/10m/(+/- 1/9" at 33Ft). Besides highly visible green beam, an outdoor pulse mode extends laser working range up to 60m/197Ft with Huepar LR-5RG/LR-6RG Line Laser Receiver in bright light or outdoor conditions. 

• MULTIFUNCTIONAL LASER TOOL: The one 360° horizontal and two 360° vertical laser lines can be selected individually by separate H and V button on the keypad. With our smart pendulum system, this line laser level tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.

• FULLY LAYOUT WITH 3 x 360° LINE LASERS: One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room, provides an all-in-one level and alignment solution for one-person job setup. Three laser lines cross at 90°angles makes user quickly visualize and finish square layout. The laser tool quickly arranges and squares room layout with three 360° laser lines.

• PACKAGE CONTENTS & WARRANTY: The kit comes with a hard carry case bringing much more convenience to carry and store the laser tool. The kit also includes 2 Li-ion batteries, magnetic bracket, type-c power cord, power adapter, laser target plate, user manual. Huepar is committed to providing Best-in-Class service to our customers- 24/7 Service Team（response in 24hrs & solution in 48hrs）; Lifetime Customer Support(hassle-free of exceeding the warranty).

Huepar LS03CG 3 x 360 Green Laser Level Specifications:

With advanced laser level technology, Huepar is committed itself to providing solutions for a wide variety of applications of greater accuracy and precision.

• Projection: 3 x 360° Green Laser Lines
• Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
• Laser Wavelength: 505-520nm
• Horizontal/Vertical Accuracy: ±1/9in at 33ft (±3mm/10m)
• Leveling/Compensation Range: ±4°
• Leveling Time: 3s
• Working Distance: 95 feet(30m) (300 LUX), 197 feet(60m) with Huepar Laser Detector LR-5RG / LR-6RG
• Operating Time: 8 hours continual use with all laser beams on
• Power Source: Two 3.7V / 5200mAh Li-ion Battery
• Mount Size: 1/4"-20
• IP Rating: IP54 dust-proof, waterproof and shockproof, reliable and tough
• Operation Temperature Range: Between -10℃ and +50℃
• Storage Temperature Range: Between -20℃ and +70℃

WARNING: Avoid direct exposure of the laser beam to the eyes.

2 Large Capacity Li-ion Batteries & Type-C Charging Port

This laser tool utilizes the 3.7V / 5200mAh large capacity Li-ion battery. An extra battery pack is included in the package for backup.

Users can charge the battery independently with the. Power adapter. There is a Type-C charging port on the Li-ion battery that can be charged separately.

4 battery indicators on the Li-ion battery pack allow users to know the current battery level and charging status.

With Type-C charging port, the laser level can also be charged by phone, laptop, power bank, car charger, etc.

Almost Unlimited Field of Application:

One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room.

The three laser lines can be selected individually depends on job site applications. The one 360° horizontal and two 360° vertical laser lines can be selected individually by separate H and V button on the keypad.

Short press operation button to switch the laser line combinations in turn. 

Pulse Mode

After power on, short press the power button to switch ON/OFF the pulse mode.

Pulse mode extends the working range up to 200Ft in brighter working conditions when using with Huepar Line Laser Receiver.

It is compatible with Huepar LR-6RG / LR-5RG Laser Detector only.

Note: Keep the pulse mode on when using with a receiver.

Self-leveling mode & Manual mode

Once the pendulum unlocked, the self-leveling mode is enabled. The laser beam will beep as well as the laser beam blink fast when the tool is out of self-leveling range ±4°.

Manual mode:

When the pendulum is in the locked position, the laser tool can be placed for use at any angle.

The laser beam will blink every 3-5 seconds to remind you it's not self-leveling now.

3 X 360°Laser Lines Switching

• This laser tool provides three 360 planes of laser light. The top 360° horizontal line can be used for ceiling installation.

• Two 360° vertical lines cross at 90°angles that makes user quickly visualize and finish square layout.

• Short press the "H" and "V" buttons on the keypad to switch the Horizontal and Vertical laser lines separately.

Durable Design: 

• The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection.

• The kit comes with a hard carry case bringing much more convenience to carry and store the laser tool.

• IP54 water/dust resistance ensures you work well in hazardous working conditions.

Bright Green Laser Diode:

• Bright Green Laser DThis cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.iode:

Package Contents:

• 1 x Huepar LS03CG Laser Level
• 2 x Rechargeable Li-ion Batteries 3.7V / 5200mAh
• 1 x Type-C Power Cord
• 1 x Power Adapter
• 1 x Magnetic Bracket
• 1 x Green Laser Target Plate
• 1 x Hard Carry Case
• 1 x Multilingual User Manual

1 x Huepar LS03CG
2 x Rechargeable Li-ion Batteries 3.7V / 5200mAh
1 x Hard Carry Case
1 x Laser Target Plate User Manual
1 x Magnetic Bracket
1 x Type-C

We accept the following forms of payment:
1. Credit Card (Visa, MasterCard, American Express, Discover)
2. Debit Card (Visa, MasterCard, Discover)
3. Paypal
4. Paypal Credit
5. Apple Pay
6. Google Pay
7. Shop Pay
8. Affirm Financing (excluding West Virginia and Iowa)
9. Bank Transfer

All official website orders will automatically receive a free 2-year membership warranty.

We insist on providing customers with high-quality products and promise to provide customers with 24-month worry-free after-sales service.

✪

The time frame of an order delivery is divided into two parts:

• Processing time: 1-2 working days
• Shipping time: 2-5 working days

✪

PREMIUM SERVICE, SUPERIOR QUALITY

24/7 Premium service team
Equipped with factory-trained experts, Huepar's consumer service team strives to find the right solution for your needs – from advice to sales and repair & maintenance services.
You can enjoy efficient support from Huepar- we promise to respond in 24hrs and solve the problem in 48hrs.

Lifetime Customer Support
All Huepar products come with lifetime customer support - no worries about exceeding the service period.
All product defects, such as accuracy malfunction, battery and charger damage and requests for replacement parts will be dealt with on time, every time.

Note: Please contact our customer care using online chat service at https://huepar.com/support or email“support@huepar.com”if there is any problem with your payment.