Huepar Laser Level Li-ion Battery with Type-C Charging Port & Hard Carry Case B21 CG

WHY CHOOSE HUEPAR? - PREMIUM SERVICE, SUPERIOR QUALITY

24/7 Premium service team

• Equipped with factory-trained experts, Huepar's consumer service team strives to find the right solution for your needs – from advice to sales and repair & maintenance services.
• You can enjoy efficient support from Huepar- we promise to respond in 24hrs and solve the problem in 48hrs.

Lifetime Customer Support

• All Huepar products come with lifetime customer support - no worries about exceeding the service period.
• All product defects, such as accuracy malfunction, battery and charger damage and requests for replacement parts will be dealt with on time, every time.

Huepar is committed to providing best-in-class service to our customers with our 24/7 service team (response in 24hrs, solution in 48hrs). We offer lifetime customer support (no worries about exceeding the warranty!) Our local maintenance center means your product can be repaired or replaced faster.

Fair price, superior quality (Little Higher Price, Much Better Quality)

• 【1H / 2V Multi-line Laser for Wide Application】: The laser level B21CG projects 360° horizontal line and two 120° vertical lines cover the floor, wall, ceiling around the room. The individual and combined laser lines can be selected individually depends on job site applications. With our smart pendulum system, this laser level tool self-levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle.
• 【Dual Power Methods & Type-C Charging Port】: Huepar B21CG Laser Level employed a large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery comes with a Type-C charging port that can be charged separately. When taking out the battery, the laser tool can be used at the job site by plugged in. 4 battery indicators on the keypad allow users to know the current battery volume and charging protection helps prevent from overcharging.
• 【Brighter Green Laser & Outdoor Pulse Mode】: This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet. The outdoor pulse mode can be activated by pressing the Pulse Mode Button, allowing to extend the laser range up to 200 feet with Huepar Line Laser Detector.
• 【More Installation Methods】: The laser level comes with 1/4"-20 thread to suit for standard tripod or laser mounting pole. Equipped with a magnetic pivoting base, the laser tool can be rotated to the required angle. And the 1/4"-20 & 5/8"-11 mounting threads help mount it to different tripod threads. Two strong magnets allow for attachment to metal track and steel. Two nail holes for more fixing methods when working. The laser windows can be removed and replaced with a screwdriver.
• 【Durable Design & Package Contents】: The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection. IP54 water/dust resistance ensures you work well in hazardous working conditions. The kit comes with a hard carry case bringing much more convenient to carry and store the laser tool. Package includes Laser level, Li-ion battery with type-c charging port, Magnetic bracket, Type-C power cord, Power adapter, Target plate, User manual.

1 H & 2V Mulit-line Laser Level:

• One 360° horizontal and two 120° vertical lines enable users to cover the floor, wall, ceiling all around the room. Two vertical lines to make dividing a room easier.
• Short press operation button to switch the laser lines in turn. Longer working time by activating only the laser lines needed for the job.
• The horizontal line, vertical lines and combined laser lines can be selected individually depends on job site applications.

Smart Pendulum - Self-leveling Mode & Manual Mode:

Self-leveling Mode:

• When the laser tool is switched to the unlocked position, the self-leveling mode is enabled.
• The laser beam will flash when the tool is beyond self-leveling range ± 4°.

Manual / Tilt Mode:

• When the pendulum locked, the laser tool can be placed for alignment at any angle.
• The laser beam will blink every 3-5 seconds to remind you that it's not self-leveling now.

Power-saving Outdoor Pulse Mode

• Turn ON the pulse mode:After power ON, short press "P" button to switch ON/OFF the pulse mode.
• Pulse mode extends the working range up to 200 feet in brighter working conditions when using with Huepar Line Laser Detector.
• When the pulse mode is activated, the laser beams are dimmer, the pressure on eyes is less when working at close range, and the working time can be appropriately extended
• It is compatible with Huepar LR-6RG / LR-5RG Line Laser Receiver(need to purchase separately) only.
• Keep the pulse mode on when using with a receiver.

Type-C Charging Port

• This laser tool utilizes the included large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time.
• The lithium battery with the Type-C charging port can be charged separately.
• Direct input charging:When taking out the battery, the laser tool can be used at the job site by plugged in.
• Four battery indicators on keypad allow users to know the current battery volume.
• Charging protection helps prevent from overcharging.

More Installation Methods

• 1/4"-20 female threadon the laser level can help to mount it to the tripod or laser mounting pole.
• 360° Strong Magnetic Pivoting Base: Allows being adsorbed onto metal track and steel. The base provides 360° free rotation to meet different angles required.
• Replaceable Protective Cover: The laser windows can be removed and replaced with a screwdriver.
• Green Target Plate: Increases the visibility of the laser beam.

Durable Design

• The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection.
• The kit comes with a hard carry case bringing much more convenience to carry and store the laser tool.
• IP54 water/dust resistance ensures you work well in hazardous working conditions.

Bright Green Laser Diode:

• This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability.
• At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet.

Package Contents:

l 1 x Huepar B21CG Laser Level

l 1 x Rechargeable Lithium Battery 3.7V / 5200mAh

l 1 x Type-C Power Cord

l 1 x Power Adapter

l 1 x 360° Magnetic Pivoting Base

l 1 x Green Laser Target Plate

l 1 x Multilingual User Manual

l 1 x Hard Carry Case

l The laser windows can be removed and replaced with a screwdriver.